View TS1871IYLT_8518628.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this is information on a product in full production. november 2012 doc id 6992 rev 7 1/25 25 ts187x, ts187xa 1.8 v input/output, rail-to-rail, low power operational amplifiers datasheet ? production data features operating range from v cc = 1.8 to 6 v rail-to-rail input and output extended v icm (v cc- - 0.2 v to v cc+ + 0.2 v) low supply current (400 a) gain bandwidth product (1.6 mhz) high unity gain stability esd tolerance (2 kv) latch-up immunity available in ? sot23-5 micropackage ? miniso-8, so-8, so-14 ? tssop8, tssop14 package applications battery powered applications (toys) portable communication devices (cell phones) audio drivers (headphone drivers) laptop/notebook computers description the ts187x (single, dual and quad) device can operate with voltages as low as 1.8 v. they feature both input and output rail-to-rail. the common mode input voltage extends 200 mv beyond the supply voltages at 25 c, while the output voltage swing is within 100 mv of each rail with a 600 load resistor. the devices consume typically 400 a per channel while offering 1.6 mhz of gain bandwidth product. the amplifiers provide a high output drive capability at typically 65 ma loads. these features make the ts187x family ideal for sensor interface, battery supplied and portable applications. table 1. device summary reference single version dual version quad version ts187x ts1871 ts1872 ts1874 ts187xa ts1871a ts1872a ts1874a ts1872id/idt-ts1872ist-ts1872ipt 1 2 3 5 4 v cc- v cc+ in- out in+ v cc- 1 2 3 5 4 8 7 6 n.c. n.c. in+ in- out + _ n.c. v cc+ in2+ v cc- 1 2 3 5 4 8 7 6 in1+ in1- out2 + _ out1 in2- + _ v cc+ in2+ v cc- 1 2 3 5 4 8 7 6 in1+ in1- out2 + _ out1 in2- + _ v cc+ v cc- 1 2 3 11 4 14 13 12 in2+ in2- out4 out2 in4+ in4- 5 6 7 8 10 9 + _ + _ + _ out3 in3+ in3- + _ out1 in1+ in1- v cc+ v cc- 1 2 3 11 4 14 13 12 in2+ in2- out4 out2 in4+ in4- 5 6 7 8 10 9 + _ + _ + _ out3 in3+ in3- + _ out1 in1+ in1- v cc+ ts1871id/idt ts1871ilt ts1874id/idt-ts1874ipt www.st.com
contents ts187x, ts187xa 2/25 doc id 6992 rev 7 contents 1 absolute maximum ratings and operating conditions . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 3.1 so-8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 3.2 tssop8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 3.3 miniso-8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 3.4 so-14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3.5 tssop14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 3.6 sot23-5 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 4 ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 5 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
ts187x, ts187xa absolute maximum ratings and operating conditions doc id 6992 rev 7 3/25 1 absolute maximum ratings and operating conditions table 2. absolute maximum ratings symbol parameter value unit v cc supply voltage (1) 1. all voltage values, except differential voltage, are with respect to network terminal. 7v v id differential input voltage (2) 2. differential voltages are the non-inverting input terminal with respect to the inverting input terminal. if v id > 1 v, the maximum input current must not exceed 1 ma. when v id > 1 v, add an input series resistor to limit the input current. 1 v v in input voltage v cc- -0.3 to v cc+ +0.3 v t stg storage temperature -65 to +150 c t j maximum junction temperature 150 c r thja thermal resistance junction-to-ambient (3) sot23-5 miniso-8 so-8 so-14 tssop8 tssop14 3. short-circuits can cause excessive heating. destructive dissipation can result from simultaneous short-circuits on all amplifiers. 250 190 125 103 120 100 c/w r thjc thermal resistance junction-to-case sot23-5 miniso-8 so-8 so-14 tssop8 tssop14 81 39 40 31 37 32 c/w esd hbm: human body model (4) 4. human body model: a 100 pf capacitor is charged to the specified voltage, then discharged through a 1.5 k resistor between two pins of the device. this is done for all couples of connected pin combinations while the other pins are floating. 2kv mm: machine model (5) 5. machine model: a 200 pf capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 ). this is done for all couples of connected pin combinations while the other pins are floating. 200 v cdm: charged device model (6) 6. charged device model: all pins and package are charged together to the specified voltage and then discharged directly to ground through only one pin. this is done for all pins. 1.5 kv latch-up immunity 200 ma lead temperature (soldering, 10 sec.) 250 c output short-circuit duration see (7) 7. short-circuits from the output to v cc can cause excessive heating. the maximum output current is approximately 80 ma, independent of the magnitude of v cc . destructive dissipation can result from simultaneous short-circuits on all amplifiers.
absolute maximum ratings and operating conditions ts187x, ts187xa 4/25 doc id 6992 rev 7 table 3. operating conditions symbol parameter value unit v cc supply voltage 1.8 to 6 v v icm common-mode input voltage range t oper = 25 c, 1.8 v cc 6v t min < t oper < t max , 1.8 v cc 6v v cc- - 0.2 to v cc+ + 0.2 v cc- to v cc+ v t oper operating free air temperature range -40 to + 125 c
ts187x, ts187xa electrical characteristics doc id 6992 rev 7 5/25 2 electrical characteristics table 4. electrical characteristics measured at v cc+ = +1.8 v with v cc- = 0 v, c l and r l connected to v cc /2, and t amb = 25 c (unless otherwise specified) (1) symbol parameter conditions min. typ. max. unit v io input offset voltage v icm = v out = v cc /2 ts1871a/2a/4a t min t amb t max ts1871/2/4 t min t amb t max 0.1 1 1.5 3 6 mv v io input offset voltage drift 2 v/c i io input offset current v icm = v out = v cc /2 (2) t min t amb t max 330 60 na i ib input bias current v icm = v out = v cc /2 (2) t min t amb t max 40 125 150 na cmr common mode rejection ratio 20 log ( v ic / v io ) 0 v icm v cc, v out = v cc /2 t min t amb t max 55 52 77 db a vd large signal voltage gain v out = 0.5 to 1.3 v r l = 2 k r l = 600 77 70 91 84 db v oh high level output voltage v id = 100 mv r l = 2 k r l = 600 t min t amb t max, r l = 2 k t min t amb t max, r l = 600 1.65 1.62 1.65 1.62 1.77 1.74 v v ol low level output voltage v id = -100 mv r l = 2 k r l = 600 t min t amb t max, r l = 2 k t min t amb t max, r l = 600 30 46 100 150 100 150 mv i o output source current v id = 100 mv, v o = v cc- 20 58 ma output sink current v id = -100 mv, v o = v cc+ 20 68 i cc supply current (per amplifier) v out = v cc /2 a vcl = 1, no load t min t amb t max 400 560 600 a gbp gain bandwidth product r l = 10 k , c l = 100 pf, f = 100 khz 0.9 1.6 mhz sr slew rate r l = 10 k , c l = 100 pf, a v = 1 0.38 0.54 v/s m phase margin c l = 100 pf 53 degrees e n input voltage noise f = 1 khz 27 nv/ hz thd total harmonic distortion 0.01 % 1. all parameter limits at temperatures different from 25 c are guaranteed by correlation. 2. maximum values include unavoidable inaccuracies of the industrial tests.
electrical characteristics ts187x, ts187xa 6/25 doc id 6992 rev 7 table 5. electrical characteristics measured at v cc = +3 v with v cc- = 0 v, c l and r l connected to v cc /2, and t amb = 25 c (unless otherwise specified) (1) symbol parameter conditions min. typ. max. unit v io input offset voltage v icm = v out = v cc /2 ts1871a/2a/4a t min t amb t max ts1871/2/4 t min t amb t max 0.1 1 1.5 3 6 mv v io input offset voltage drift 2 v/c i io input offset current v icm = v out = v cc /2 (2) t min t amb t max 330 60 na i ib input bias current v icm = v out = v cc /2 (2) t min t amb t max 4 125 150 na cmr common mode rejection ratio 20 log ( v ic / v io ) 0 v icm v cc, v out = v cc /2 t min t amb t max 60 57 80 db a vd large signal voltage gain v out = 0.5 to 2.5 v r l = 2 k r l = 600 80 74 94 88 db v oh high level output voltage v id = 100 mv r l = 2 k r l = 600 t min t amb t max , r l = 2 k t min t amb t max , r l = 600 2.82 2.80 2.82 2.80 2.95 2.95 v v ol low level output voltage v id = -100 mv r l = 2 k r l = 600 t min t amb t max, r l = 2 k t min t amb t max, r l = 600 39 58 120 160 120 160 mv i o output source current v id = 100 mv, v o = v cc- 20 60 ma output sink current v id = -100 mv, v o = v cc+ 20 70 i cc supply current (per amplifier) v out = v cc /2 a vcl = 1, no load t min t amb t max 450 650 690 a gbp gain bandwidth product r l = 10 k , c l = 100 pf, f = 100 khz 1 1.7 mhz sr slew rate r l = 10 k , c l = 100 pf, a v = 1 0.42 0.6 v/s m phase margin c l = 100 pf 53 degrees e n input voltage noise f = 1 khz 27 nv/ hz thd total harmonic distortion 0.01 % 1. all parameter limits at temperatures different from 25 c are guaranteed by correlation. 2. maximum values include unavoidable inaccuracies of the industrial tests.
ts187x, ts187xa electrical characteristics doc id 6992 rev 7 7/25 table 6. electrical characteristics measured at v cc = +5 v with v cc- = 0 v, c l and r l connected to v cc /2, and t amb = 25 c (unless otherwise specified) (1) symbol parameter conditions min. typ. max. unit v io input offset voltage v icm = v out = v cc /2 ts1871a/2a/4a t min t amb t max ts1871/2/4 t min t amb t max 0.1 1 1.5 3 6 mv v io input offset voltage drift 2 v/c i io input offset current v icm = v out = v cc /2 (2) t min t amb t max 330 60 na i ib input bias current v icm = v out = v cc /2 (2) t min t amb t max 70 130 150 na cmr common mode rejection ratio 20 log ( v ic / v io ) 0 v icm v cc, v out not equal to v cc /2 t min t amb t max 65 62 85 db svr supply voltage rejection ratio 20 log ( v cc / v io ) v cc = 1.8 to 5 v 70 90 db a vd large signal voltage gain v out = 1 to 4 v r l = 2 k r l = 600 83 77 97 91 db v oh high level output voltage v id = 100 mv r l = 2 k r l = 600 t min t amb t max , r l = 2 k t min t amb t max , r l = 600 4.80 4.75 4.80 4.75 4.95 4.90 v v ol low level output voltage v id = -100 mv r l = 2 k r l = 600 t min t amb t max, r l = 2 k t min t amb t max, r l = 600 52 70 130 188 130 188 mv i o output source current v id = 100 mv, v o = v cc- 20 65 ma output sink current v id = -100 mv, v o = v cc+ 20 80 i cc supply current (per amplifier) v out = v cc /2 a vcl = 1, no load t min t amb t max 500 835 875 a gbp gain bandwidth product r l = 10 k , c l = 100 pf, f = 100 khz 1 1.8 mhz sr slew rate r l = 10 k , c l = 100 pf, a v = 1 0.42 0.6 v/s m phase margin c l = 100 pf 55 degrees e n input voltage noise f = 1 khz 27 nv/ hz thd total harmonic distortion 0.01 % 1. all parameter limits at temperatures different from 25 c are guaranteed by correlation. 2. maximum values include unavoidable inaccuracies of the industrial tests.
electrical characteristics ts187x, ts187xa 8/25 doc id 6992 rev 7 figure 1. input offset voltage distribution figure 2. input offset voltage vs. temperature figure 3. input bias current vs. temperature at v cc = 1.8 v figure 4. input bias current vs. temperature at v cc = 3 v figure 5. supply current/amplifier vs. supply voltage figure 6. supply current/amplifier vs. temperature
ts187x, ts187xa electrical characteristics doc id 6992 rev 7 9/25 figure 7. common mode rejection vs. temperature figure 8. supply voltage rejection vs. temperature at v cc = 1.8 v figure 9. supply voltage rejection vs. temperature at v cc = 3 v figure 10. supply voltage rejection vs. temperature at v cc = 5 v figure 11. power supply voltage rejection vs. frequency figure 12. open loop gain vs. temperature at v cc = 1.8 v
electrical characteristics ts187x, ts187xa 10/25 doc id 6992 rev 7 figure 13. open loop gain vs. temperature at v cc = 3 v figure 14. open loop gain vs. temperature at v cc = 5 v figure 15. high level output voltage vs. temperature, r l = 600 figure 16. low level output voltage vs. temperature, r l = 600 figure 17. high level output voltage vs. temperature, r l = 2 k figure 18. low level output voltage vs. temperature, r l = 2 k
ts187x, ts187xa electrical characteristics doc id 6992 rev 7 11/25 figure 19. output current vs. temperature at v cc = 1.8 v figure 20. output current vs. temperature at v cc = 3 v figure 21. output current vs. temperature at v cc = 5 v figure 22. output current vs. output voltage at v cc = 1.8 v figure 23. output current vs. output voltage at v cc = 3 v figure 24. output current vs. output voltage at v cc = 5 v
electrical characteristics ts187x, ts187xa 12/25 doc id 6992 rev 7 figure 25. gain and phase vs. frequency at v cc = 1.8 v figure 26. gain and phase vs. frequency at v cc = 3 v figure 27. gain and phase vs. frequency at v cc = 5 v figure 28. gain bandwidth product vs. temperature figure 29. gain bandwidth product vs. supply voltage figure 30. slew rate vs. temperature at v cc = 1.8 v
ts187x, ts187xa electrical characteristics doc id 6992 rev 7 13/25 figure 31. slew rate vs. temperature at v cc = 3 v figure 32. slew rate vs. temperature at v cc = 5 v figure 33. phase margin vs. load capacitor figure 34. phase margin vs. output current figure 35. gain margin vs. output current figure 36. equivalent input noise vs. frequency
electrical characteristics ts187x, ts187xa 14/25 doc id 6992 rev 7 figure 37. distortion vs. output voltage at v cc = 1.8 v figure 38. distortion vs. output voltage at v cc = 3 v figure 39. distortion vs. output voltage at v cc = 5 v figure 40. distortion vs. output voltage at v cc = 2.7 v, r l = 150 figure 41. distortion vs. output voltage at v cc = 2.7 v, r l = 1500 figure 42. distortion vs. output voltage at v cc = 2.7 v, r l = 4700
ts187x, ts187xa electrical characteristics doc id 6992 rev 7 15/25 figure 43. distortion vs. frequency at v cc = 1.8 v figure 44. distortion vs. frequency at v cc = 3 v figure 45. distortion vs. frequency at v cc = 1.8 v, r l = 32 figure 46. distortion vs. frequency at v cc = 3 v, r l = 32 figure 47. output power vs. supply voltage figure 48. common mode rejection ratio vs. frequency at v cc = 5 v
package information ts187x, ts187xa 16/25 doc id 6992 rev 7 3 package information in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack specifications, grade definitions and product status are available at: www.st.com . ecopack is an st trademark.
ts187x, ts187xa package information doc id 6992 rev 7 17/25 3.1 so-8 package information figure 49. so-8 package outline table 7. so-8 package mechanical data symbol dimensions millimeters inches min. typ. max. min. typ. max. a 1.75 0.069 a1 0.10 0.25 0.004 0.010 a2 1.25 0.049 b 0.28 0.48 0.011 0.019 c 0.17 0.23 0.007 0.010 d 4.80 4.90 5.00 0.189 0.193 0.197 e 5.80 6.00 6.20 0.228 0.236 0.244 e1 3.80 3.90 4.00 0.150 0.154 0.157 e 1.27 0.050 h 0.25 0.50 0.010 0.020 l 0.40 1.27 0.016 0.050 l1 1.04 0.040 k1 81 8 ccc 0.10 0.004
package information ts187x, ts187xa 18/25 doc id 6992 rev 7 3.2 tssop8 package information figure 50. tssop8 package outline table 8. tssop8 package mechanical data symbol dimensions millimeters inches min. typ. max. min. typ. max. a 1.20 0.047 a1 0.05 0.15 0.002 0.006 a2 0.80 1.00 1.05 0.031 0.039 0.041 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.008 d 2.90 3.00 3.10 0.114 0.118 0.122 e 6.20 6.40 6.60 0.244 0.252 0.260 e1 4.30 4.40 4.50 0.169 0.173 0.177 e 0.65 0.0256 k0 80 8 l 0.45 0.60 0.75 0.018 0.024 0.030 l1 1 0.039 aaa 0.10 0.004
ts187x, ts187xa package information doc id 6992 rev 7 19/25 3.3 miniso-8 package information figure 51. miniso-8 package outline table 9. miniso-8 package mechanical data symbol dimensions millimeters inches min. typ. max. min. typ. max. a1.10.043 a1 0 0.15 0 0.006 a2 0.75 0.85 0.95 0.030 0.033 0.037 b 0.22 0.40 0.009 0.016 c 0.08 0.23 0.003 0.009 d 2.80 3.00 3.20 0.11 0.118 0.126 e 4.65 4.90 5.15 0.183 0.193 0.203 e1 2.80 3.00 3.10 0.11 0.118 0.122 e 0.65 0.026 l 0.40 0.60 0.80 0.016 0.024 0.031 l1 0.95 0.037 l2 0.25 0.010 k0 80 8 ccc 0.10 0.004
package information ts187x, ts187xa 20/25 doc id 6992 rev 7 3.4 so-14 package information figure 52. so-14 package outline table 10. so-14 package mechanical data symbol dimensions millimeters inches min. typ. max. min. typ. max. a 1.35 1.75 0.05 0.068 a1 0.10 0.25 0.004 0.009 a2 1.10 1.65 0.04 0.06 b 0.33 0.51 0.01 0.02 c 0.19 0.25 0.007 0.009 d 8.55 8.75 0.33 0.34 e 3.80 4.0 0.15 0.15 e 1.27 0.05 h 5.80 6.20 0.22 0.24 h 0.25 0.50 0.009 0.02 l 0.40 1.27 0.015 0.05 k8 (max.) ddd 0.10 0.004
ts187x, ts187xa package information doc id 6992 rev 7 21/25 3.5 tssop14 package information figure 53. tssop14 package outline table 11. tssop14 package mechanical data symbol dimensions millimeters inches min. typ. max. min. typ. max. a 1.20 0.047 a1 0.05 0.15 0.002 0.004 0.006 a2 0.80 1.00 1.05 0.031 0.039 0.041 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 d 4.90 5.00 5.10 0.193 0.197 0.201 e 6.20 6.40 6.60 0.244 0.252 0.260 e1 4.30 4.40 4.50 0.169 0.173 0.176 e 0.65 0.0256 l 0.45 0.60 0.75 0.018 0.024 0.030 l1 1.00 0.039 k0 80 8 aaa 0.10 0.004
package information ts187x, ts187xa 22/25 doc id 6992 rev 7 3.6 sot23-5 package information figure 54. sot23-5l package outline table 12. sot23-5l package mechanical data symbol dimensions millimeters inches min. typ. max. min. typ. max. a 0.90 1.20 1.45 0.035 0.047 0.057 a1 0.15 0.006 a2 0.90 1.05 1.30 0.035 0.041 0.051 b 0.35 0.40 0.50 0.013 0.015 0.019 c 0.09 0.15 0.20 0.003 0.006 0.008 d 2.80 2.90 3.00 0.110 0.114 0.118 d1 1.90 0.075 e 0.95 0.037 e 2.60 2.80 3.00 0.102 0.110 0.118 f 1.50 1.60 1.75 0.059 0.063 0.069 l 0.10 0.35 0.60 0.004 0.013 0.023 k0 10
ts187x, ts187xa ordering information doc id 6992 rev 7 23/25 4 ordering information table 13. order codes order code temperature range package packaging marking ts1871id/idt -40 c to +125 c so-8 tube or tape and reel 1871i ts1871iaid/aidt 1871ai ts1871ilt sot23-5l tape and reel k171 ts1871ailt k172 TS1871IYLT (1) sot23-5l (automotive grade) tape and reel k182 ts1871aiylt (1) k183 ts1872id/idt so-8 tube or tape and reel 1872i ts1872aid/aidt 1872ai ts1872iydt (1) so-8 (automotive grade) tube or tape and reel 1872y ts1872aiydt (1) 1872ay ts1872ipt tssop8 tape and reel 1872i ts1872aipt 1872a ts1872iypt (1) tssop8 (automotive grade) tape and reel 1872y ts1872aiypt (1) 872ay ts1872ist miniso-8 tape and reel k171 ts1872aist k172 ts1874id/idt so-14 tube or tape and reel 1874i ts1874aid/aidt 1874ai ts1874iydt (1) so-14 (automotive grade) tape and reel ts1874y ts1874aiydt (1) ts1874ay ts1874ipt tssop14 tape and reel 1874i ts1874aipt 1874ai ts1874iypt (1) tssop14 (automotive grade) tape and reel ts1874y ts1874aiypt (1) ts1874ay 1. qualified and characterized according to aec q100 and q003 or equivalent, advanced screening according to aec q001 and q 002 or equivalent.
revision history ts187x, ts187xa 24/25 doc id 6992 rev 7 5 revision history table 14. document revision history date revision changes 01-apr-2002 1 first release. 02-jan-2005 2 modifications on amr table 2 on page 3 (explanation of v id and v i limits). 21-may-2007 3 added limits over temperature range in table 4 on page 5 , table 5 on page 6 , table 6 on page 7 . added svr in ta ble 6 (svr parameter removed from ta b l e 4 and ta b l e 5 ). added equivalent input voltage noise in ta b l e 4 , ta ble 5 , and ta b l e 6 . added r thjc values in ta b l e 2 . added automotive grade part numbers to order codes table. moved order codes table to section 4 on page 23 . updated format of package information. 17-jan-2008 4 updated footnote for automotive grade order codes in ta b l e 1 3 . 12-mar-2010 5 updated document format. modified headings, added root part number ts187xa and added table 1: device summary on cover page. corrected typical values for a vd , isource, isink and vol in ta b l e 4 , table 5 and table 6 . added figure 48: common mode rejection ratio vs. frequency at v cc = 5 v . updated package information in chapter 3 . removed order codes for so-8 automotive grade packages (ts1871iydt and ts1871aiydt) from ta b l e 1 3 . removed order codes for dip package from ta ble 1 3 . 06-jul-2012 6 updated table 13: order codes . 19-nov-2012 7 updated features (added miniso-8, so-8, so-14, tssop8, and tssop14 package). updated titles of ta b l e 5 and ta b l e 6 (replaced v dd by v cc- ). updated TS1871IYLT, ts1871aiylt, ts1872iydt, ts1872aiydt, ts1874iydt, ts1874aiydt, ts1874iypt, ts1872iypt, ts1872aiypt, and ts1874aiypt order code in ta b l e 1 3 (status qualified). updated packaging for ts1874iydt and ts1874aiydt order code (indicated only tape and reel) in table 13 . added note 1. below ta b l e 1 3 . minor corrections throughout document.
ts187x, ts187xa doc id 6992 rev 7 25/25 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at an y time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in military, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2012 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of TS1871IYLT

	To Download TS1871IYLT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .